Installing Echem Analyst
You can choose to only install Echem AnalystFollow these steps:
Choose Client Login on our home page:
Create a new account or login with your current account:
Log In if you have an…
Menu
Close
Support
Installation & Setup
Installing a new potentiostat, multiplexer, flexcell, or not certain what all those leads are for? Resources here will help get you going. Keep in mind that quite a bit of information can be found in the manual, quick start guide, and through the help menu in Framework and Analyst.
Bipotentiostat Installation and Setup
IntroductionGamry Instruments potentiostats can be used in bipotentiostat configuration for the purpose of rotating ring-disk electrode experiments.
Step-by-step Instructions for Changing Your ECM8 COM Port Number
NOTE: Be sure to install the drivers for the USB-to-Serial Converter before beginning.
Interpreting the Calibration Data of Your Potentiostat
Purpose of This NoteThis technical note is intended to help you better understand what the calibration results for your Gamry potentiostat mean.
Step-by-Step Software Authorization for a MultEchem System
MultEchem systems allow multiple instruments to share a single software license and be run from a single computer.
Installing a USB-to-Serial adapter for Gamry Hardware
Computers with Serial ports are become increasingly rare. However, many research instruments still rely on this very simple communication protocol.
MultEchem Dongle #00000 Installed
USB ports where the dongle does not engage tightly can result in Microsoft Windows detecting the dongle but not properly reading the dongle serial number.