Search this site
Contact Us

Software Updates

For your convenience, we have created a ‘Client Portal’ for registering your Gamry instrument(s). This feature will enable you to:

  • Keep track of all of your Gamry Instruments

  • See at a glance what software you are running

  • See the warranty information available on your instruments

If you are a licensed Gamry user, please create an account and register your instrument(s) so you can upgrade to the latest revision of Gamry software.

Your software can be downloaded once you instrument has been registered.

You should always use the latest version of our software so that you have access to the most features and any recent improvements.

Please note: If you have acquired a Gamry potentiostat through an OEM (not directly from Gamry or it’s representatives/distributors) you should check with the OEM regarding software updates first.

Version 7.10 Download (Log in to Client Portal)

Instruments Supported: Interface 1000 & 1010, Interface 5000, Reference 600/600+620, Reference 3000/3000AE, eQCM 
System Requirements: Windows™ 10 and Windows™ 11 (64-bit)*
The current release (as of 12/15/2023) of our software is tested and fully compatible with Windows™ 11
Computer Requirements: Anything that can run Windows™ comfortably is more than powerful enough for our software

(All instruments shipped after 12/2015 must use Version 7)

Version 6.33 Download* (Not Windows™ 10 Compatible)

Improved Reference Family Calibration

Instruments Supported: Interface 1000 (excludes 1010), Reference 600, Reference 3000 (with serial number 25XXX or lower), Series G 300/750, PCI4 300/750 FAS2
System Requirements: Windows XP SP3/Vista/7/8/8.1 (32-bit and 64-bit) -
Not Windows™ 10 Compatible
Computer Requirements: Anything that can run Windows™ comfortably is more than powerful enough for our software

*We no longer support Version 6.33 of our software.  Contact us for more information on the possibility of upgrading your instruments to v7 software.

Windows™ 7 Starter Edition

VFP600, ESA410 and Resonator software are not supported in Windows™ 7 Starter Edition.
These programs are compiled LabView programs and National Instruments does not support Windows™ 7 Starter Edition.

If you encounter any difficulties, please contact our technical support at or call 215-682-9330 and we can assist you with this procedure.