A Live Talk “Non-equilibrium Chemical and Biological Systems with Electrochemical Control" presented on February 24, 2022 hosted by Gamry Instruments and presented by Chong Liu, Assistant Professor in the Department of Chemistry & Biochemsitry at UCLA.
Menu
Close
Resources
Video Library
We have prepared this series of videos to assist you in getting accurate results and the best possible performance from your Gamry Electrochemical Measuring Instrument.
Visit our Application Notes and our Technical Support Resources for additional assistance.
This series is also available on the Gamry Instruments' YouTube Channel.
Webinars
-
Non-equilibrium Chemical and Biological Systems with Electrochemical Control
-
Probing Redox and Swelling Properties in Electroactive Polymers
A Live Talk “Probing Redox and Swelling Properties in Electroactive Polymers” presented on June 10, 2021 hosted by Gamry Instruments and presented by Dr. Anna Österholm, Senior Research Scientist at GA Tech.
-
Corrosion Resistance of Metals for Orthopedic Implants
A Live Talk “Corrosion Resistance of Metals for Orthopedic Implants in Simulated Synovial Fluids under Inflammatory Conditions” presented on May 20, 2021 hosted by Gamry Instruments and presented by Simona Radice, PhD, Research Engineer - Rush University Medical Center
-
Model Thin Film Polymer Electrolytes
A Live Talk Electrochemistry with Model Thin Film Polymer Electrolytes presented on April 29th, 2021 hosted by Gamry Instruments and presented by Dr. Chris Arges, Assistant Professor in Chemical Engineering at LSU Baton Rouge.
Download the Presentation in PDF -
FTIR Spectroelectrochemistry
Live Webinar from Bruker and Gamry Spectroelectrochemistry: More than just the sum of its parts presented February 9, 2021 by Dr. Sergey Shilov, Bruker Optics and Dr. David Loveday, Gamry Instruments
-
Electrochemistry for Sensors and Energy
A Live Talk Electrochemistry for Sensors and Energy presented on December 2nd, 2020 hosted by Gamry Instruments and presented by Ariel L. Furst, Assistant Professor of Chemical Engineering at MIT.
-
EIS At Rotating Disk Electrode
A Live Talk EIS at a Rotating Disk Electrode presented on October 22nd, 2020 hosted by Gamry Instruments and presented by
Dr. Jerome Babauta.Download this presentation in PDF Format.
-
Calculating Tafel Constants
A Live Demonstration A Tafel Experiment - Calculating Tafel Constants presented on August 20th, 2020 hosted by Gamry Instruments and presented by Andrew McCaskill.
A PDF Download of this presentation will be available soon!
-
Calculating Corrosion Rates with LPR and EIS
A Live Demonstration Calculating Corrosion Rates with LPR and EIS presented on August 6th, 2020 hosted by Gamry Instruments and presented by Andrew McCaskill.
Download this presentation in PDF Format.
-
EIS of Difficult Samples
EIS of Difficult Samples Webinar was presented live on July 23rd, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
-
Cyclic Voltammetry of Biofilms
Cyclic Voltammetry of Biofilms Webinar was presented live on July 9th, 2020 hosted by Gamry Instruments and presented by Dr. Jerome Babauta .
-
Webinar Presented by Gamry & Protochips
Introduction to Electrochemistry and its Integration to In Situ TEM
In this webinar, we will have presentations from both Dr. Madeline Dukes from Protochips and Dr. Dave Loveday from Gamry Instruments who will share their knowledge and expertise in fundamental electrochemical measurements and how they can be used for operando observations at the nanoscale that will accelerate research for fuel cell catalysts, batteries, and corrosion.
Introduction to Electrochemistry and its Integration to In Situ TEM. Presented on June 25th. Hosted by Gamry Instruments & Protochips and presented by Dr. David Loveday from Gamry and Dr. Madeline Dukes from Protochips.
-
Live Instrument Demonstration
A Live Gamry Instruments' Demonstration was presented on June 11th, 2020 hosted by Gamry Instruments and presented by Andrew McCaskill.
-
Battery Testing Techniques
Battery Testing Techniques Webinar was presented live on June 4th, 2020 hosted by Gamry Instruments and presented by Dr. David Loveday.
Download this presentation in PDF Format.
-
Understanding Potentiostat Specifications
Understanding Potentiostat Specifications Webinar was presented live on May 21st, 2020 hosted by Gamry Instruments and presented by Dr. Chris Beasley.
Download this presentation in PDF Format.
-
Potentiostat Fundamentals
Potentiostat Fundamentals Webinar was presented live on May 14th, 2020 hosted by Gamry Instruments and presented by Dr. Chris Beasley.
Download this presentation in PDF Format.
-
Electrochemical Corrosion Rate Measurement
Electrochemical Corrosion Rate Measurement Webinar was presented live on May 7th, 2020 hosted by Gamry Instruments and presented by Dr. David Loveday
Download this presentation in PDF Format.
-
Low Impedance EIS
EIS Low Z Systems Webinar was presented live on April 30th, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
-
Tracking Electrochemically Active Biofilms
Tracking Electrochemically Active Biofilms Using an EQCM Webinar was aired live on April 16, 2020 hosted by Gamry Instruments and presented by Dr. Jerome Babauta.
Download this presentation in PDF Format.
-
EIS of Coatings and Corrosion
EIS of Coatings & Corrosion Webinar was aired live on April 9, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
-
Basics of EIS
Basics of EIS Webinar was presented live on March 26, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
Demonstration Videos
-
Universal Battery Holder
The Universal Battery Holder™ allows connection of a large variety of batteries, from coin-sized to larger cylindrical shapes (up to 26650), to Gamry Instruments’ potentiostats.
-
QCM-I Mini
QCM-D, a Quartz Crystal Microbalance with Dissipation, the QCM-I Mini with Impedance is a high-sensitivity mass sensor which measures the change in frequency and dissipation of a quartz crystal resonator and any adsorbed film.
-
eQCM-I Mini
Quartz Crystal Microbalance (QCM) the new eQCM-i Mini electrochemical QCM with dissipation monitoring - QCM-D. Thie eQCM-i QCM allows you to make three electrode measurements in a flow cell.
-
EIS Box
Intro to the EIS (Ice) Box an 8 ch device measures impedance on batteries, fuel cells, super caps
-
MultiPort Corrosion Cell Kit
A Gamry Instruments Demonstration Video: Assembling the MultiPort Corrosion Cell Kit
-
Bipotentiostat with 2 Gamry Interface Potentiostats
Gamry Demonstration Video Using two Interface Potentiostats to create a BiPotentiostat
-
Bipotentiostat with 2 600+ Potentiostats
Create a BiPotentiostat with 2 Gamry Reference 600+ Potentiostats
-
Calibrate Your Potentiostat
This demonstration video shows you how to calibrate your Gamry Potentiostat
-
Interface 5000 Potentiostat
The Interface 5000 designed for cell-level testing monitors half cell & whole cell V in an experiment
-
Screen Printed Electrodes
An introduction to Gamry's Screen Printed Electrodes and Screen Printed Electrode Stands
-
Break Apart Screen Printed Electrodes
Gamry's SPEs come in groups of 4 and need to be snapped apart to be used individually.
-
Reference 3000 & 30k Booster
Hooking up a Reference 3000 with a 30k Booster for High-current Pulses for Battery Research
-
Auxiliary Electrometer in the Gamry Reference 3000 AE
Using the Auxiliary Electrometer with 8 add'l voltage measurement channels each measures any 5-v range in compliance range
-
Calibrate the Gamry Reference 3000AE
Calibrating the Gamry Reference 3000 Auxiliary Electrometer's 8 additional voltage measurement channels.
-
How to Assemble the Gamry QCM Cell
Assembling the Gamry Quartz Crystal Microbalance Cell for Static Cell and Flow Cell.
-
Unboxing the Gamry 600+ Potentiostat
All Gamry potentiostats are boxed similarly - this video explains the pieces shipped with the instrument
-
Dr. Bob's Cell Demo
Andrew demonstrates the Dr. Bob's Electrochemical Cell Kit
Gamry Software
-
Introduction to Echem Analyst 2
Echem Analyst 2
The new EA2 includesMult-Language - currenlty English, Chinese, Japenese, German and Spanish
Period OR Comma delimited numbers
Batch Fitting -
Export Data from Echem Analyst 2
This video walks you through the easy process of exporting XY data as text to your own program from Gamry's New Echem Analyst 2.
-
Distribution of Relaxation Times
Echem Anlyst 2 new function, Distribution of Relaxation Times.
This function could be useful helping to determine what model to use for equivalent circuit fitting.
-
Key Features for EIS
Introduction to some key features of Gamry Instruments Software and EIS
Total Harmonic Distortion
Drift Correction
Distribution of Relaxation Times -
Analyzing a Cyclic Voltammogram
This video shows how to Analyze a Cyclic voltammogram using Gamry’s Echem Analyst. Finding Peaks and Integrating.
-
Using the Autofit Routine for EIS
A short video describing how to use the Autofit routine for fitting EIS data, available in Version 6 (or greater) of our Echem Analyst software.
-
Export EIS Data from Original Echem Analyst
This video walks you through the easy process of exporting XY data as text or to export the chart. Though the video discusses EIS data, the steps outlined here also apply to exporting data acquired using other techniques.
-
Find fs/fp in Resonator
This video is meant to show QCM users how to find the resonant frequencies of a quartz crystal using Gamry Resonator Software. -
Find fs/fp for a Loaded Crystal
This video is meant to show users how to find the resonant frequencies of a polybithiophene-loaded crystal using Gamry Resonator Software.
-
EIS of Lithium ion Battery
Electrochemical Impedance Spectroscopy of Lithium ion Battery Demonstration of Gamry's Autofit routine fitting 17 free parameters.
-
Gamry's eQCM 10M Air Mode Operation
This video shows how to utilize the QCM to operate in air.
-
How to Open a File in GAMRY Echem Analyst
This video shows how to get all the extension files stored in the Gamry dala File (Default file to store all the experiment data)
Using the Gamry Sequence Wizard
-
Gamry's Sequence Wizard Part 1
A short video to get you started using the Sequence Wizard.
-
Gamry's Sequence Wizard Part 2
A short video to get you started using the Sequence Wizard.
-
Gamry's Sequence Wizard Part 3
A short video to get you started using the Sequence Wizard.
-
Gamry's Sequence Wizard Part 4
A short video to get you started using the Sequence Wizard.
Product Videos
-
The Gamry Difference
What makes the Interface™ 1010 series potentiostat a Gamry.
-
Complete Lab Course in Electrochemistry
At Gamry we wanted to help solve this dilemma, so we have updated our Laboratory Course in Electrocehmistry. If you do not want to run a full semester course, you can select as few as one experiment kit at a time.
Presentations
-
Gamry The Leader in EIS
-
Basics of EIS Presentation
Presentation of an introduction to Electrochemical Impedance Spectroscopy (EIS) theory and has been kept as free from mathematics and electrical theory as possible.
-
Care of Potentiostats
This presentation answers questions like - "What is a Potentiostat?", "What is Potential?", "What is Current?"
-
EIS System Check
How to Run an EIS Quick Check: Accuracy and System Limits - Checking your potentiostat and understanding the systems' limits. EIS Accuracy Contour Plot vs. Quick Check - Cable Setup Matters
Intro To Gamry
-
Why Gamry Instruments
Learn more about Gamry and how we measure up to the competition.
-
The Gamry Mobile App
A convenient way to find Technical Support Articles, Application Notes, Electronic versions of our Instrument's User Manuals, News and events.
-
Our Products
The latest Gamry Instruments and Electrochemistry Applications where our products are used.
