Interface 5000P

Interface 5000P

The Gamry Interface 5000P is designed for people doing cell-level testing of various energy storage and conversion devices.  It even includes capabilities for monitoring both half cell voltages in addition to the whole cell voltage during an experiment. Imagine the time savings in being able to characterize both half cells and the full cell in the same experiment.  

Characterizing Both Half Cells

The Interface 5000P has the ability to monitor both half cells during experiments. Two electrometers measure the potential of the anode and cathode in addition to the full cell voltage when used with an embedded reference electrode.

(Click image to Enlarge)

Upgradeabilty

The Interface 5000P also comes in a more advanced model, the Interface 5000E.  This model provides full capabilities for all application areas.  An in the field upgrade is available to upgrade an Interface 5000P to an Interface 5000E.  Contact us for details regarding upgrades.

Need More Capabilities?  See the Interface 5000E

Below are additional details regarding the capabilities of the Interface 5000P potentiostat/galvanostat/ZRA. Each bullet point contains a list of the type of techniques available for the instrument to run.

• Electrochemical Energy - Includes charge, discharge, cyclic charge-discharge techniques, potentiostatic, galvanostatic, self-discharge, leakage rate, and read cell voltage.  
• Electrochemical Impedance Spectroscopy - Includes the ability to perform EIS up to 20 kHz.  
• Physical Electrochemistry  - Techniques such as cyclic voltammetry, chronoamperometry, and chronopotentiometry and derivatives of these techniques.

Other details

• 2, 3, 4 and 5 electrode measurements
• Measure both half cell voltages in addition to the full cell voltage
• Electrical Isolation
  • Floating instrument: use with autoclaves, mechanical stress apparatus, or pipeline probes.
• Portable
  • Size of a chemistry textbook, weighing only 2.5 kgs. Easy USB 2.0 connection to a Windows computer.
• Built-In EIS
  • On-board DDS to perform EIS from 10 µHz to 20 kHz. 
• DSP (Digital Signal Processing) Mode
  • Oversamples for improved signal-to-noise and accurate capacitance measurements.
• Current Interrupt iR Compensation
  • Gamry potentiostats and their controlling software use control loop algorithms to accurately measure and correct for uncompensated resistance.
• Auxiliary I/O
  • Control additional equipment via additional I/O interfaces: external signal input, analog voltage output, analog current output, auxiliary A/D input, and digital I/O connector.
  • RTD temperature probe measurement
• Warranty
  • Protected by 2-year factory service warranty.