“Customizable python script is quite useful. The UI is nice and clean. Produced less noise during EIS measurement of resistive membranes.”
“Good value for money!”
// Interface line
Interface 1010E
Potentiostat / Galvanostat / ZRA
Most popular
An updated version of our extremely popular Interface 1000E — EIS extended to 2 MHz and temperature monitoring added. A full-featured potentiostat capable of performing all techniques, including electrochemical impedance spectroscopy.
What it does
- Performs all techniques, DC and impedance, in one instrument
- Built-in EIS from an on-board DDS — no upgrade license
- Potentiostat, galvanostat, and ZRA modes without added hardware
- Temperature monitoring with an RTD, and CPT with the TDC5
- Floating instrument for autoclaves and pipeline probes
- Compatible with the LPI1010 Load/Power Interface and the IMX8 Electrochemical Multiplexer
For applications including
±1 A
Maximum current
9 ranges, 10 nA – 1 A
±12 V
Max applied potential
±20 V compliance @ 1 A
2 MHz
EIS upper limit
From 10 µHz, included
3.3 fA
Current resolution
Minimum resolution
2.4 kg
Weight
24 × 6 × 27 cm, portable
// System highlights
Published EIS accuracy, not claimed accuracy
Interface 1010E Potentiostat
If you're looking for a full-featured potentiostat capable of performing all techniques, including electrochemical impedance spectroscopy, for applications such as physical electrochemistry, electrochemical corrosion, battery testing, fuel cell testing, dye solar cell testing, and sensor development, then the Interface 1010E is the right potentiostat for you.
Electrochemical Impedance Spectroscopy
Gamry provides Accuracy Contour Plots for every one of our potentisotats that is EIS-capable. The accuracy contour plot provides a detailed look at the performance you can expect from your potentiostat in real-world situations. The results include the cell cable. Accuracy contour plots are important because they let you compare the performance of potentiostats from different manufacturers to ensure you are getting the best possible measurement.
Flexible Configurations
The Interface 1010E potentiostat can be configured as a single-channel potentiostat, bipotentiostat, or multichannel-potentiostat. Gamry provides you with the flexibility you need to get more done.
Need less capabilities? See the Interface 1010B
Accuracy contour plot · voltage ≤ 10 mV rms · 60 cm cell cable
// Research citations
Cited in the literature
Citation data provided by Bioz.
// Overview
The Interface 1010ETM is an updated version of our extremely popular Interface 1000E. We've extended EIS to 2 MHz and added temperature monitoring. It is a full-featured potentiostat capable of performing all techniques, including electrochemical impedance spectroscopy.
Key features include:
- Max Applied Current - ±1 A
- Maximum Applied Potential - ±12 V
- EIS 10 μHz - 2 MHz
- Compatible with the LPI1010
For applications including:
// More details
The techniques it can run
Physical Electrochemistry
Cyclic voltammetry, chronoamperometry, chronopotentiometry, and derivatives of these techniques.
Pulse Voltammetry
Pulse voltammetry, square wave voltammetry, and associated stripping techniques such as anodic stripping voltammetry.
DC Corrosion
Standard DC corrosion tests — polarization resistance, potentiodynamic, cyclic polarization, and galvanic corrosion, among others.
Electrochemical Energy
Single cells and stacks of batteries, fuel cells, or supercapacitors: charge, discharge, cyclic charge-discharge, potentiostatic, galvanostatic, self-discharge, and leakage rate.
Electrochemical Frequency Modulation
Non-destructive corrosion-rate measurement without prior knowledge of the Tafel constants — it also determines them and gives two internal validity checks.
Critical Pitting Temperature
Controls the potentiostat, TDC5 Temperature Controller, and accessories to automatically measure the critical pitting temperature of a material.
Electrochemical Noise
A more general form of electrochemical noise testing; also an ECM8 Multiplexer-compatible noise software package.
Electrochemical Impedance Spectroscopy
Scripts for potentiostatic, galvanostatic, and hybrid impedance, plus single-frequency Mott-Schottky, power-leveling multisine, equivalent-circuit fitting, and Kramers-Kronig validation.
eChemDC Toolkit
All of eChemBasic plus advanced signals and data-acquisition modes for CV, pulse voltammetry, and dynamic DC corrosion.
eChemAC Toolkit
Full eChemDC Toolkit capabilities plus electrochemical impedance spectroscopy (EIS) and EFM experiments.
Other details
2, 3, and 4 electrode measurements
Electrical isolation
Floating instrument: use with autoclaves, mechanical stress apparatus, or pipeline probes.
Portable
The size of a chemistry textbook, with an easy USB 2.0 connection to a Windows computer.
Built-in EIS
On-board DDS to perform EIS from 10 µHz to 2 MHz.
DSP (digital signal processing) mode
Oversamples for improved signal-to-noise and accurate capacitance measurements.
Current-interrupt iR compensation
Control-loop algorithms accurately measure and correct for uncompensated resistance.
Auxiliary I/O
External signal input, analog voltage output, analog current output, and a digital I/O connector; temperature via an RTD (not included).
Warranty
Protected by a 2-year factory service warranty.
LPI1010 compatible
Pairs with the LPI1010 Low-Current Interface for low-current work.
// Specifications
The complete technical detail
System
| Potentiostat | Yes |
|---|---|
| Galvanostat | Yes |
| Zero Resistance Ammeter | Yes |
| Floating (Isolated from Earth Ground) | Yes |
| Cell Connections | 2, 3, or 4 |
| Maximum Current | ±1 A |
| Current Ranges | 9 (10 nA - 1 A) |
| Current Ranges · (including internal gain) | 11 |
| Minimum Current Resolution | 3.3 fA |
| Maximum Applied Potential | ±12 V |
| Rise Time | <1 μs |
| Minimum Time Base | 10 μs |
| Noise and Ripple | <20 μV rms |
| Weight | 2.4 kg |
| Dimensions | 24 (W) x 6 (H) x 27 (D) |
Control Amplifier
| Compliance Voltage | ±20 V (@ 1A) |
|---|---|
| Output Current | >±1 A |
| Speed Settings | 5 |
| Unity Gain Bandwidth | 980, 260, 40, 4, 0.4 kHz |
EIS Measurement
| EIS | 10 μHz - 2 MHz |
|---|---|
| EIS Accuracy | See AccuracyContour Plot |
| AC Amplitude | 2.33 V maximum50 μV minimum |
Electrometer
| Input Impedance | >10^12 Ω |
|---|---|
| Input Current (typical) | <20 pA |
| Bandwidth | >15 MHz |
| CMRR | >86 dB (10 kHz)>60 dB (1 MHz) |
Potential
| Applied Accuracy | ±1 mV ±0.2% of setting |
|---|---|
| Applied Resolution | 200 μV, 50 μV, 12.5 μV/bit |
| Measured Accuracy | ±1 mV ±0.3% of reading |
| Measured Resolution | 1 μV, 10 μV, 100 μV, 400 μV/bit |
Current
| Applied Accuracy | ±5 pA ±0.3% of range |
|---|---|
| Applied Resolution | 0.0033% full-scale/bit |
Measured Current
| Measured Accuracy | ±5 pA ±0.3% of range |
|---|---|
| Measured Resolution | 0.0033% full-scale/bit |
| Bandwidth | >10 MHz (1A - 100 μA)>1.5 MHz (10 μA)>0.15 MHz (1 μA) |
Specifications are drawn from this product page and are pending datasheet verification — see SPEC-VERIFICATION.md.
// Resources