interface 1010t potentiostat

Interface 1010T

The Interface 1010T (#992-00115) is a perfect potentiostat for use in undergraduate and graduate teaching labs.

System Highlights

The Interface 1010T is an entry-level potentiostat designed for undergraduate and graduate teaching labs.  It provides all of the capabilities needed for getting students introduced to physical and analytical electrochemistry.  It even provides for potentiostatic EIS up 10 kHz.  

  • Physical Electrochemistry  - Techniques such as cyclic voltammetry, chronoamperometry, and chronopotentiometry.   
  • Pulse Voltammetry - Techniques such as differential pulse voltammetry, normal pulse voltammetry, Osteryoung square wave voltammetry, and associated stripping techniques.
  • Electrochemical Impedance Spectroscopy - Potentiostatic EIS up to 10 kHz.  

See the Specifications tab for the instrument specifications.  The Interface 1010T can be upgraded to a fully-featured Interface 1010E with an infield upgrade.  This allows you to get a low-cost potentiostat for teaching purposes that can later be upgraded to a fully-capable research-grade potentiostat able to perform experiments for a wide variety of applications.  

Specifications

SYSTEM

Potentiostat Yes
Galvanostat Yes
Zero Resistance Ammeter Yes
Floating (Isolated from Earth Ground)  Yes
Cell Connections 2, 3, or 4
Maximum Current ± 100 mA
Current Ranges 6 (1 uA - 100 mA)
Current Ranges
(including internal gain)
8 (10 nA - 100 mA)
Minimum Current Resolution 0.3 pA
Maximum Applied Potential ± 5 V
Rise Time <1 μs
Minimum Time Base 1 ms
Noise and Ripple <20 μV rms
Weight 2.4 kg
Dimensions 24 (W) x 6 (H) x 27 (D) 27 cm
   

CONTROL AMPLIFIER

Compliance Voltage ±20 V
Output Current >±1 A
Speed Settings 5
Unity Gain Bandwidth 980, 260, 40, 4, 0.4 kHz
   

EIS MEASUREMENT

EIS 100 mHz - 20 kHz
EIS Accuracy 99%
AC Amplitude 2.33 V maximum
17.8 μV minimum
   

ELECTROMETER

Input Impedance >1012 Ω
Input Current (typical) <20 pA
Bandwidth >10 MHz
CMRR >80 dB (10 kHz)
>60 dB (1 MHz)
   

POTENTIAL

Applied Accuracy    ±1 mV ±0.2% of setting
Applied Resolution 200 μV, 50 μV, 12.5 μV/bit
Measured Accuracy ±1 mV ±0.3% of reading
Measured Resolution 1 μV, 10 μV, 100 μV, 400 μV/bit
   

CURRENT

Applied Accuracy    ±5 pA ±0.3% of range
Applied Resolution 0.0033% full-scale/bit
   

MEASURED CURRENT

Measured Accuracy ±5 pA ±0.3% of range
Measured Resolution 0.0033% full-scale/bit
Bandwidth >10 MHz (1A - 100 μA)
>1.5 MHz (10 μA)
>0.15 MHz (1 μA)

Downloads

Laboratory Course in Electrochemistry

Materials Included 

Below is a table of all materials Gamry Instruments supplies in the Laboratory Course in Electrochemistryto perform all eleven experiments for ten pairs of students.

Part number

Description

Quantity

 
820-00005 Sample of mild steel 30
930-00015 Ag|AgCl reference electrode 1
932-00024 Platinum working electrode 1
932-00009 Platinum microlectrode 1
935-00065 Micro stirring bar 1
935-00120 Carbon screen-printed electrode 36
935-00122 Platinum screen-printed electrode 60
972-00065 Cuvette cap 1
987-00099 DigiElch student edition 1
988-00049 Student edition book 20
988-00050 Teacher edition book 1
990-00193 Dr. Bob’s Cell kit 1
990-00195 Polishing kit 1
990-00196 EuroCell kit 1
990-00419 AC Dummy Cell 1
990-00420 Screen-printed electrode cell stand for 4 mm banana plugs 1
990-00421 Screen-printed electrode adapter for 4 mm cable 1