Rcv.StopAt()

Type: INSTANCE FUNCTION

Purpose: Enable or disable the RCV termination limits.

There are two limiting conditions upon which a curve may prematurely terminate:

1. Under

I < Limit

2. Over

I > Limit

The Over criterion is used to limit a positive current swing. The Under criterion limits a negative current swing.

These conditions may be individually enabled and disabled.

Usage:

Rcv.StopAt(Under, Over)
     
Under REAL

Enable the Under test and set value.

  NIL Disable the Under test
Over REAL Enable the Over test and set value
  NIL Disable the Over test

Related Topics Link IconRelated Topics