Rcv.SprintPoint()

Type: INSTANCE FUNCTION

Purpose: Used in output of data from an RCVobject.

A data point from the object is printed to an ASCII string. This string can in turn be printed to the active output file.

The format of the data string is:

PointNumber <tab> T <tab> Vf <tab> Im <tab> Vu <tab> Sig <tab> Ach <tab> Over

You can use this function along with the Printl() function to output point i to the output file as follows:

Printl("\t",Rcv.SprintPoint(i)

Usage:

Result = Rcv.SprintPoint(PointNumber)
     
Result STRING

The output string.

PointNumber INDEX The point to be printed. PointNumber is zero-based. If the requested point has not been taken, a parameter error is issued.
T REAL Elapsed time from starting from Rcv.Run().
Vf REAL Applied E vs Eref.
Im REAL Measured cell current.
Vu REAL Uncompensated voltage.
Sig REAL Signal sent to Control Amplifier.
Ach REAL Aux Channel voltage.
Over STRING Hexadecimal number representing overload status

Related Topics Link IconRelated Topics