The object contains data extracted from one column of the RCV object's data array. The data, once extracted, can then be submitted to other objects for further calculation. For example, a LINFIT object performs a linear-regression analysis on two DATACOL objects.
A new DATACOL object is automatically created by the call to RCV.DataCol(). It is usually transient, existing only for one function call.
|DataCol = Rcv.DataCol(ColumnCode)|
|DataCol||DATACOL||The new object containing the data extracted from the RCV data array.|
A code identifying the column to be used.
0 = Time
1= Applied voltage
2 = Uncompensated voltage
3 = Measured Current
4 = Signal sent to Control Amplifier
5 = Measured Aux Channel Voltage
Or use the predefined constants:
RCV_T = Time
RCV_Vf = Applied Voltage
RCV_Vu = Uncompensated Voltage
RCV_Im = Measured Current
RCV_Sig = Signal sent to Control Ampllifier