RCV.CyclePrintl()

Type: INSTANCE FUNCTION

Purpose: Print the results of an Rcv experiment out to the Output file.

The Output record contains a separate table for each cycle and is printed in the format:

Tagn <tab> "TABLE"
<tab> "Pt" <tab> "T" <tab> "Vf" <tab> "Im" <tab> "Vu" <tab> "Sig" <tab>"Ach" <tab>"IERange" <tab>  "Over"
<tab> "#" <tab> "s" <tab> "V vs. Ref." <tab> "A" <tab> "V" <tab> "V" <tab>"V"<tab>"#" <tab>  "bits"
<tab> Pt1 T V I V V V # Flags
<tab> Pt2 T V I V V V # Flags
...
<tab> PtN T V I V V V # Flags

Where the symbols have the following meanings:

  Tagn The curve Tag [from RCV.New() or optional argument]) and the cycle number(n)
  Pt(#) Sequential number of a point.
  T Elapsed time from starting from RCV.Run()
  Vf Applied Voltage vs Eref.
  Im Measured cell current.
  Vu Uncompensated voltage
  Sig Signal sent to Control Amplifier
  Ach Aux Channel voltage
  IERange IE Range used for the data point
  Over

Overload flags

Usage:

Rcv.CyclePrintl(Tag)
     
Tag STRING

Optional. Used to print a different Tag than the one used in the call to IVT.New()

Related Topics Link IconRelated Topics