ChronoP.Printl()

Type: INSTANCE FUNCTION

Purpose: Print the results of a ChronoP experiment out to the Output file.

The Output record is printed in the format:

Tag <tab> "TABLE" <tab> Points
<tab> "Pt" <tab> "T" <tab> "Vf" <tab> "Im" <tab> "Vu" <tab> "Sig" <tab>"Ach" <tab>  "Over"
<tab> "#" <tab> "s" <tab> "V" <tab> "A" <tab> "V" <tab> "V" <tab>"V" <tab>  "bits"
<tab> Pt1 T V I V V V Flags
<tab> Pt2 T V I V V V Flags
...
<tab> PtN T V I V V V Flags

where the symbols have the following meanings:

  Tag The curve Tag [from CHRONOP.New() or optional argument]
  Points Total number of points acquired.
  Pt(#) Sequential number of a point.
  T Elapsed time from starting from ChronoP.Run.
  Vf Applied Voltage vs Eref.
  Im Measured cell current.
  Vu Uncompensated voltage.
  Sig Signal sent to Control Amplifier.
  Ach Aux Channel voltage.
  Over Overload flags.

Usage:

ChronoP.Printl(Tag)
     
Tag STRING

Optional. Used to print a different Tag than the one used in the call to CHRONOP.New().

Related Topics Link IconRelated Topics