Related Topics
The object contains data extracted from one column of the CHRONOC object's data array. The data, once extracted, can then be submitted to other objects for further calculation. For example, a LINFIT object performs a linear-regression analysis on two DATACOL objects.
A new DATACOL object is automatically created by the call to CHRONOC.DataCol(). It is usually transient, existing only for one function call.
| DataCol = ChronoC.DataCol(ColumnCode) | ||
| DataCol | DATACOL | The new object containing the data extracted from the CHRONOC data array. |
| ColumnCode | INDEX |
A code identifying the column to be used. 0 = Time 1= Accumulated Charge 2 = Applied Voltage 3 = Uncompensated Voltage 4 = Measured Current 5 = Signal sent to Control Amplifier 6 = Measured Aux Channel Voltage 7 = I/E Range used 8 = Overloads Or use the predefined constants: CHRONOC_T = Time CHRONOC_Q = Accumulated Charge CHRONOC_Vf = Applied Voltage CHRONOC_Vu = Uncompensated Voltage CHRONOC_Im = Measured Current CHRONOC_Sig = Signal sent to Control Ampllifier CHRONOC_Ach = Measured Aux Channel Voltage CHRONOC_IERange = I/E Range Used CHRONOC_Over = Overloads |