Pv.StopAt()

Type: INSTANCE FUNCTION

Purpose: Enable or disable the PV termination limits.

There are six limiting conditions upon which a curve may prematurely terminate:

Potentiostatic Mode

1. Under

Im < Limit

2. Over

Im > Limit

Galvanostatic Mode

1. Under

V < Limit

2. Over

V > Limit

The Over criterion is used to limit a positive swing in the measurement. The Under criterion limits a negative swing in the measurement.

These conditions may be individually enabled and disabled.

Usage:

Pv.StopAt(Under, Over)
     
Under REAL

Enable the Under test and set value.

  NIL Disable the Under test
Over REAL Enable the Over test and set value
  NIL Disable the Over test

Related Topics Link IconRelated Topics