Purpose: Used in output of data from a PV object.

A data point from the object is printed to an ASCII string. This string can in turn be printed to the active output file.

The format of the data string is:

PointNumber <tab>T<tab>Vfwd<tab>Vrev<tab>Vstep<tab> Ifwd<tab>Irev<tab>Idif<tab>Sig <tab>Ach <tab> Over

You can use this function along with the Printl() function to output point i to the output file as follows:



Result = Pv.SprintPoint(PointNumber)

The output string.

PointNumber INDEX The point to be printed. PointNumber is zero-based. If the requested point has not been taken, a parameter error is issued.
T REAL Elapsed time from starting from Pv.Run.
Vfwd REAL Applied forward voltage.
Vrev REAL Applied reverse voltage.
Vstep REAL Applied step voltage.
Ifwd REAL Measured forward current.
Irev REAL Measured reverse current.
Idiff REAL Difference between Ifwd and Irev.
Sig REAL Signal sent to control amplifier
Ach REAL Aux Channel voltage.
Over STRING Hexadecimal number representing overload status

Related Topics Link IconRelated Topics