Rcv.Printl()

Type: INSTANCE FUNCTION

Purpose: Print the results of an RCV experiment out to the Output file.

The Output record is printed in the format:

Tagn<tab> "TABLE" <tab> Points
<tab> "Pt" <tab> "T" <tab> "Vf" <tab> "Im" <tab> "Vu" <tab> "Sig" <tab>"Ach" <tab>"IERange" <tab>  "Over"
<tab> "#" <tab> "s" <tab> "V vs. Ref." <tab> "A" <tab> "V" <tab> "V" <tab>"V"<tab>"#" <tab>  "bits"
<tab> Pt1 T V I V V V # Flags
<tab> Pt2 T V I V V V # Flags
...
<tab> PtN T V I V V V # Flags

where the symbols have the following meanings:

  Tag The curve Tag [from RCV.New() or optional argument]
  Points Total number of points acquired.
  Pt(#) Sequential number of a point.
  T Elapsed time from starting from Rcv.Run().
  Vf Applied Voltage vs Eref.
  Im Measured cell current.
  Vu Uncompensated voltage.
  Sig Signal sent to Control Amplifier.
  Ach Aux Channel voltage.
  IERange IE Range used for the data point.
  Over Overload flags.

Usage:

Rcv.Printl(Tag)
     
Tag STRING

Optional. Used to print a different Tag than the one used in the call to RCV.New().

Related Topics Link IconRelated Topics