The Output record is printed in the format:
Tag <tab> "TABLE" <tab> Points
<tab> "Pt" <tab> "T" <tab> "Q" <tab> "Vf" <tab> "Im" <tab> "Vu" <tab> "Sig" <tab>"Ach" <tab> "Over"
<tab> "#" <tab> "s" <tab> "C" <tab> "V" <tab> "A" <tab> "V" <tab> "V" <tab>"V" <tab> "bits"
<tab> Pt1 T Q V I V V V Flags
<tab> Pt2 T Q V I V V V Flags
...
<tab> PtN T Q V I V V V Fla
where the symbols have the following meanings:
Tag | The curve Tag [from CHRONOC.New() or optional argument] | |
Points | Total number of points acquired. | |
Pt(#) | Sequential number of a point. | |
T | Elapsed time from starting from ChronoC.Run. | |
Q | Accumulated charge. | |
Vf | Applied Voltage vs Eref. | |
Im | Measured cell current. | |
Vu | Uncompensated voltage. | |
Sig | Signal sent to Control Amplifier. | |
Ach | Aux Channel voltage . | |
Over | Overload flags. |
ChronoC.Printl(Tag) | ||
Tag | STRING |
Optional. Used to print a different Tag than the one used in the call to CHRONOC.New(). |