The object contains data extracted from one column of the CHRONOC object's data array. The data, once extracted, can then be submitted to other objects for further calculation. For example, a LINFIT object performs a linear-regression analysis on two DATACOL objects.
A new DATACOL object is automatically created by the call to CHRONOC.DataCol(). It is usually transient, existing only for one function call.
|DataCol = ChronoC.DataCol(ColumnCode)|
|DataCol||DATACOL||The new object containing the data extracted from the CHRONOC data array.|
A code identifying the column to be used.
0 = Time
1= Accumulated Charge
2 = Applied Voltage
3 = Uncompensated Voltage
4 = Measured Current
5 = Signal sent to Control Amplifier
6 = Measured Aux Channel Voltage
7 = I/E Range used
8 = Overloads
Or use the predefined constants:
CHRONOC_T = Time
CHRONOC_Q = Accumulated Charge
CHRONOC_Vf = Applied Voltage
CHRONOC_Vu = Uncompensated Voltage
CHRONOC_Im = Measured Current
CHRONOC_Sig = Signal sent to Control Ampllifier
CHRONOC_Ach = Measured Aux Channel Voltage
CHRONOC_IERange = I/E Range Used
CHRONOC_Over = Overloads