This filter has no effect on potentiostat stability.
If the parameter passed by SetVchFilter() is a frequency in Hz, the potentiostat then selects the most appropriate filter-setting able to pass information corresponding to this frequency.
NOTE: Do not use the No Filter setting (0) under normal circumstances. Use it exclusively for AC impedance measurements beyond 100 kHz.
|Freq||REAL||Frequency of interest in Hz|
Filter to select:
0 = No filter
1 = 200 kHz
2 = 1 kHz
3 = 5 Hz
|BOOL||FALSE = Ground. No Pass Filter setting.|
|FilterSet||INDEX||The new filter setting.|