Purpose: Set the voltage the auxiliary DAC output on the Miscellaneous I/O Connector.

Usage: VoltageSet = Pstat.SetAnalogOut(Voltage)

  Voltage REAL

The new output voltage

  VoltageSet REAL The current voltage as set.

NOTE: For the PCI4 family of potentiostats, the offset and/or full scale range of the DAC can be changed using jumpers on the Controller Card. This function automatically adjusts the DAC scaling using any appropriate scaling values found in the "GAMRY5.INI" file. See the Hardware Operator's for further information.

This is applicable to PC5 and PCI4 instruments.

Related Topics Link IconRelated Topics