Ivt.StopAtDelay()

Type: INSTANCE FUNCTION

Purpose: Used to avoid premature stopping of a curve caused by noise creating a false reading for a StopAt test.

Avoids false readings by requiring that the StopAt criterion be met for a number N of data points before the curve stops. The parameter N can be individually set for each StopAt test.

For absolute tests, such as V > Limit, the criterion must be met for N points consecutively before the criterion will be accepted. One point missing the criterion limit resets the N point-counter.

Usage: Ivt.StopAtDelay(Imin, Imax, Vmin, Vmax, Amin, Amax)

Imin	INDEX or	Delay for this number of points
Imin	NIL	Only one point required
Imax	INDEX or	Delay for this number of points
Imax	NIL	Only one point required
Vmin	INDEX or	Delay for this number of points
Vmin	NIL	Disable the V channel lower limit.
Vmax	REAL or	Delay for this number of points
Vmax	NIL	Only one point required
Amin	INDEX or	Delay for this number of points
Amin	NIL	Only one point required
Amax	INDEX or	Delay for this number of points
Amax	NIL	Only one point required