ECM8.SetCell()

Type: INSTANCE FUNCTION

Purpose: Changes the active cell setting.

Usually used to connect one cell to the system potentiostat so that a measurement can be made on that cell. This function can also make all cells inactive.

Any previously active cell is switched to its inactive cell control mode.

The Aux A/D setting is not changed by this function.

Usage: Previous = ECM8.SetCell(Channel)

Channel	INDEX or	Number from 0 to 7. One less than the new active cell. For example, Channel = 3 activates ECM8 cell channel 4.
Channel	NIL	All cells are inactive.
Previous	INDEX or	Channel number for previous setting (0 to 7).
Previous	NIL	No channel was previously active.