ECM8.SetAux()

Type: INSTANCE FUNCTION

Purpose: Changes the Aux A/D setting.

Usually used to connect an Aux A/D channel to a potentiostat's Aux A/D input BNC connector so that a measurement can be made on that channel. This function can also be used to make all Aux A/D channels inactive.

The Active Cell setting is not changed by this function.

Usage: Previous = ECM8.SetAux(Channel)

Channel	INDEX or	Number (0 to 7). One less than the new Aux A/D channel.
Channel	NIL	All Aux A/D channels are off.
Previous	INDEX or	Channel number for previous setting (0 to 7).
Previous	NIL	No channel was previously on.