Start the data-acquisition and make this curve the active curve. This function blocks further execution of the Explain script until the curve is finished running.
|Status = FraCurve.Run()|
0 = Skip button pushed before precision criterion was met.
1 = OK, precision criterion met.
2 = Invalid, completely bogus measurement, usually a fractional cycle. Do not use these values to make a new estimate of Z.
3 = CommErr; Communications error with external FRA. Do not use these values to make a new estimate of Z.
4 = Timeout; Timeout on measurement before precision criterion was met. FraCurve contains best estimate of Z.
5 = CycleLim; Upper limit on number of cycles exceeded. FraCurve contains best estimate of Z.
6 = Reserved.
8 = Overrange; some FRA channel was overloaded. Check Overload command to see the cause.