The object is filed with data extracted from one column of the PWR object's data array. The data, once extracted, can then be submitted to other objects for further calculation. For example, a LINFIT object performs a linear regression analysis on two DATACOL objects.
A new DATACOL object is automatically created by the call to Pwr.DataCol(). It is usually transient, existing only for one function call.
|DataCol = Pwr.DataCol(ColumnCode)|
|DataCol||DATACOL||The new object containing the data extracted from the PWR data array.|
A code identifying the column to be used. Use the following Predefined constants:
PWR_T = Time
PWR_Vf = Applied Voltage
PWR_Vu = Uncompensated Voltage
PWR_Im = Measured Current
PWR_Pwr = Measured Power
PWR_R = Measured Resistance
PWR_Temp = Measured Temperature
PWR_IERange = IE Range used during measurement
PWR_Ach = Measured Voltage Aux Channel
PWR_Sig = Signal sent to Control Amp
PWR_Over = Overload column