VRAMP.New()

Type: CLASS FUNCTION

Purpose: Creates a new ramp generator.

A given Vramp object can be used by more than one curve but can be used by only one curve at a time.

The following code fragment is an example of the use of a VRAMP object:

Vramp = VRAMP.New(...)
Pstat.SetSignal(Vramp)
Pstat.InitSignal()
Pstat.SetCell(CellOn)
Cpiv = CPIV.New("CURVE", Pstat)
Cpiv.Run()
Cpiv.Printl()
...
...

Usage:

Vramp = VRAMP.New(Tag, Pstat, VInit, VFinal, ScanRate, SampleTime)
     
Tag STRING

Object tag.

Pstat PSTATCLASS

Potentiostat that will use the signal.

VInit REAL Initial value in volts.
VFinal REAL Final value in voltes.
ScanRate REAL Scan rate in volts/second.
SampleTime REAL Time between data-acquisition steps.
Vramp VRAMP The object created.

Related Topics Link IconRelated Topics