Requires StopAt criterion be met for a number of data points (N) before the curve stops. The parameter N can be individually set for each StopAt test.
For absolute tests, such as E > Limit, the criterion must be met for N points consecutively before the criterion is accepted. One point missing the criterion limit resets the N point counter.
For slope tests, such as dE/dt < Limit, the slope is evaluated over N points.
Ciiv.StopAtDelay(Under, Over, Stable, Runaway, Decreasing, Increasing)  
Under  REAL 
Delay for this number of points. 

or  NIL  Only one point required.  
Over  REAL  Delay for this number of points.  
or  NIL  Only one point required.  
Stable  REAL  Delay for this number of points.  
or  NIL  Only one point required  
Runaway  REAL  Delay for this number of points.  
or  NIL  Only one point required  
Decreasing  REAL  Delay for this number of points.  
or  NIL  Only one point required  
Increasing  REAL  Delay for this number of points.  
or  NIL  Only one point required 