Chart page |
The heart of the Potentiostatic analysis. It contains the data plotted as current versus time. |
Experimental Setup page |
A list of the parameters used to acquire the data presented on the Chart page. |
Experimental Notes |
The notes entered by the user before data-acquisition. You can edit the Notes in the analysis, and saved with the changes to an analysis data file. |
Open Circuit Voltage page |
Displays a chart of OCP vs time that was collected during the Initial Delay. |
Hardware Settings Page |
All of the potentiostat settings used during the experimental run. |
|
NOTE: THESE PAGES DO NOT APPEAR AT START-UP: |
|
This page contains a grid of integration values based on different sections in visible traces from the most recent use of the Integrate command.
|
|
This page contains a grid of minimum and maximum values of each visible trace based on the most recent use of the Min/Max command.
|