The standard galvanodynamic analysis contains the following pages at startup:
The heart of the Galvanodynamic analysis. It contains the data plotted as voltage versus log(current).
|Experimental Setup page||A list of the parameters used to acquire the data presented on the Chart page.|
|Experimental Notes||The notes entered by the user before data-acquisition. You can edit the Notes in the analysis, and saved with the changes to an analysis data file.|
|Open Circuit Voltage page||Displays a chart of OCP vs time that was collected during the Initial Delay.|
|Hardware Settings Page||All of the potentiostat settings used during the experimental run.|
|NOTE: THESE PAGES DO NOT APPEAR AT START-UP:|