Downloading Version 5.50 Software

Version 5.50 of the Gamry Software supports the new Gamry Reference 600^TM, the new Series G family of Potentiostats,  and the Gamry PCI4^TM Family Potentiostats.  It does not support the Gamry PC3^TM or the Gamry PC4^TM family of Potentiostats.

Licensed users of Gamry Version 4.x or 5.x Software may upgrade to Version 5.50 at no charge.  On the following pages you will be asked to provide the Serial Number of your PCI4/Series G Control Board or your Reference 600, and the corresponding 10 digit Authorization Number for a Gamry software application to access the download area.

Version 5.50 of the Gamry Software runs on Windows® 2000, Windows XP (32-bit and 64-bit), and Windows Vista (32-bit and 64-bit).  Current revisions are:
   Version 5.30 of the Gamry Framework^TM and
   Version 5.30 of the Gamry Echem Analyst^TM.

Version 5.50 Features.

Version 5.21 changed the location of My Gamry Data!  Get the details!

Important bug fix for PHE200 and PV220 Users.

Users of earlier versions (Version 3.2 or earlier) of the Gamry Software, or users with a Gamry PC3 or PC4 Potentiostat should contact Gamry or their local representative  for information about upgrading their older Potentiostat and Software. 

Licensed Version 3.x users (PC3 or PC4) may upgrade to Version 3.2 at no charge.

Licensed Version 4.x users with a Gamry PC4 may upgrade to  Version 4.35A at no charge.

If you are a Reference 600 user, it is important that you also download an updated version of the Instrument Firmware ("Reference Family Instrument Firmware Version 2.00") in order to use Version 5.50 of the Gamry Framework.  Consult Chapter 4 of the Reference 600 Operator's Manual ( PDF ) under "Firmware Update", or download just that section here.

Download Version 5.50 of the Gamry Framework Software including the  Framework Application Software (DC105^TM, EN120^TM, EFM140^TM, PHE200^TM, PV220^TM, and EIS300^TM) and the Echem Analyst^TM.  On the next page,  select one Application and enter your 10 digit Authorization Code for it. You will be granted access to the Gamry Framework^TM (includes the Application Software) and the Echem Analyst.

NOTE: Consult pages 8 and 9 of the Quick-Start Guide for instructions on authorizing your Framework Application Software once it is installed.

Download Version 5.50 of the ESA400^TM Electrochemical Signal Analyzer (Electrochemical Noise) and the Gamry Framework^TM Software.  On the next page,  select ESA400 and enter your 10 digit Authorization Code for it. You will be granted access to the ESA400 and the Framework Ver 5.50 (Required for ESA400 operation.) 
 
Consult pages 8 and 9 of the Quick-Start Guide for instructions on authorizing your ESA400 software once it is installed.

Download Version 5.50 of the VFP600^TM Virtual Front Panel Software and the Gamry Framework^TM Software.  On the next page,  select VFP600 and enter your 10 digit Authorization Code for it. You will be granted access to the VFP600 and the Framework Ver 5.50 (Required for VFP600 operation.) 
 
Consult pages 8 and 9 of the Quick Start Guide for instructions on authorizing your VFP600 software once it is installed.

Download Version 5.50 the Gamry Electrochemistry Toolkit^TM Software and the Gamry Framework^TM Software.  On the next page,  select the proper Toolkit and enter your 10 digit Authorization Code for it. You will be granted access to the Toolkit and the Framework Ver 5.50 (Required for Electrochemistry Toolkit operation.) 
 
Consult pages 8 and 9 of the Quick-Start Guide for instructions on authorizing your Electrochemistry Toolkit Software once it is installed.

Home | Products | App Notes | Sales | Contact | News | Support | Search

Batteries | Fuel Cells | Corrosion | Paints & Coatings | Physical Electrochemistry

Gamry Instruments © 1997-2008
  
Last revised on Thursday, February 28, 2008