Manuals and Quick-Start Guides for Gamry Products

If you need a manual for your Gamry Potentiostat or accessory, you can download a PDF file of the manual here. Click to read the manual in your browser, or "right click" and select "Save Target as..." to download the manual to your computer.

IF YOU ARE USING VERSION 5.x of the Gamry Software

Quick-Start Guides
A Quick-Start Guide is available for the Reference 3000, Reference 600, Series G Family, and PCI4 Family Potentiostats to guide you through the hardware and software installation.

Hardware Operator's Manual
The Hardware Manual is available for the following Potentiostats:

Reference 600	Reference 3000
Series G 300	Series G 750
PCI4/300	PCI4/750	FAS2

Manuals are also available for

FCI4 Fuel Cell Monitor (FC350)

ECM8 Multiplexer

TDC2 Temperature Controller

UDC3 Universal Dummy Cell for Reference 600, Series G Family, and PCI4 Family Potentiostats

IF YOU ARE USING VERSION 4.x of the Gamry Software

The Getting Started Manual is available.

The Hardware Manual is available for the following Potentiostats:

	PCI4/300		PCI4/750		FAS2
	PC4/300		PC4/750		FAS1

Manuals are also available for

FCI4 Fuel Cell Monitor (FC350)

ECM8 Electrochemical Multiplexer

TDC4 Temperature Controller

UDC2 Universal Dummy Cell for PCI4 Family Potentiostats

IF YOU ARE USING VERSION 3.x of the Gamry Software

The Hardware Manual is available for the following Potentiostats:

	PC3/300		PC3/750
	PC4/300		PC4/750

Cells

Manuals are available for the following electrochemical cell kits:

	MultiPort Corrosion Cell Kit for general corrosion studies		EuroCell for smaller volume corrosion studies
	FlexCell for Critical Pitting Temperature measurements		PTC1 Paint Test Cell for coatings evaluation by EIS
	Dr. Bob's Cell for small-scale electrochemistry		Paracell Electrochemical Cell Kit for flat samples.

Batteries | Fuel Cells | Corrosion | Paints & Coatings | Physical Electrochemistry