Universal Dummy Cell 3

Every Gamry Potentiostat is shipped with a Universal Dummy Cell 3 to calibrate and diagnose potential problems.  The Universal Dummy Cell 3 is a printed circuit board shown in the photo below.

The Universal Dummy Cell 3 has three sections: (1) Calibration, (2) DC Corrosion, and (3) EIS.

The Universal Dummy Cell 3 is used to trouble-shoot your Gamry Potentiostat and make sure it's working properly.  If you suspect a malfunction in your potentiostat, the first rule is -- remove the electrochemical cell and attach a dummy cell that will give a known response.

Photo of the Universal Dummy Cell 3 with the cell cable attached for calibration.

Home | Products | App Notes | Sales | Contact | News | Support | Search

Batteries | Fuel Cells | Corrosion | Paints & Coatings | Physical Electrochemistry

Gamry Instruments © 1997-2006
  
Last revised on Tuesday, December 26, 2006