|
|
|
|
For a complete description of the
features and capabilities of the Reference 600, download the PDF file of
the brochure. You'll need Adobe
Acrobat Reader.
Reference 600 Brochure, A4 Format
Reference 600 Brochure, 8.5 x 11 inch Format
|
|
|
The Reference 600 is a very high performance Potentiostat! With the Reference 600, you can measure the impedance
at 1 MHz with less than 2% error! That's because the Reference 600
has a Rise Time of less than 250 nanoseconds! You can acquire data
in DC experiments at 300 kHz, or one data point every 3.3 microseconds! That
translates to a scan rate in cyclic voltammetry of 1200 volts/second with
a Step Height of 4 mV.
The Reference 600 has 11 current ranges from 600 mA to 60 pA. That's
11 different current ranges in the I/E Converter. By increasing the
gain, the instrument can extend to 600 fA full-scale. With this wide
current capability, the Reference
600 is a great Potentiostat for corrosion, physical electrochemistry,
paints and coatings, and the development of lithium ion batteries.
The Reference 600 employs a very clever scheme to reduce the noise levels
in the measurement of the current, voltage, and auxiliary input signal. In addition to a well-designed layout,
components
selected to balance speed and noise, and extensive analog filtering, the
Reference 600 oversamples the voltage and current signals, then averages
to smooth the signal. The Reference 600 samples at 60 kHz (16.6
microseconds/point), then averages this data to provide the measurement at
the Sampling Period you specify during the experimental setup.
The Accuracy Contour Plot of the Reference 600 is shown below. With
the ability to measure impedances as high as 1012 ohms, the
Reference 600 does a good job on high-impedance coatings. The
combination of wide frequency range and wide impedance range puts the
Reference 600 almost in a class by itself. The accuracy at 1 MHz is
particularly impressive.
|
|
|
|
|
|
Accuracy Contour Plot
of the Reference 600
|
|
|
The USB Interface allows easy connection to desktop, portable, and laptop
computers. Using a USB hub, you can connect up to eight
Reference 600's to one computer and run them at the same time while doing
completely different experiments.
The Reference 600 has an applied potential range of ±11 volts and a
compliance voltage of ±20 volts.
The Reference is fully isolated
from the computer's chassis ground, so it can work with earth grounded cells. It
offers both current interrupt and positive feedback iR compensation.
16-bit D/A and A/D converters, along with
four terminal current and voltage measurements, provide accurate results down to
1 µV
resolution. The four terminal capability is useful for
electrochemical measurements on membranes or films.
In addition to potentiostatic and galvanostatic modes, the Reference 600
is also designed for Zero Resistance Ammeter functionality. A ZRA is
required for galvanic corrosion measurements and is preferred for
electrochemical noise measurements.
Despite these impressive specifications, the Reference 600 is surprisingly
compact. It measures 10 cm W x 20 cm H x 30 cm D and weighs about 3
kilograms. That makes it easy to carry to your measurement site,
connect to a notebook computer, and make the measurement. Put it in
your briefcase and take it on the plane with you. You can even
place the Reference 600 inside your glove box!
The Reference 600 has been tested and approved for CE Certification.
The Reference 600 is RoHS compliant.
|
|
|
Standard Features
|
|
|
- Built-In EIS - On-board
DDS to perform EIS from 10µHz to 1 MHz. And not just EIS at 1
MHz, but EIS at 1 MHz with less than 2% error in magnitude and
phase!
- Electrical Isolation - All Gamry potentiostats are fully isolated
(electrically) from the host computer's chassis ground, allowing it to function properly
with earth grounded cells. Use the Reference 600 with autoclaves, mechanical stress apparatus,
or pipeline probes for accurate results.
- It's Only Small on the Outside! - Gamry
expends considerable engineering resources to design small,
compact instruments. Why? Because a small instrument
is easier and more convenient to use than a big instrument! Despite
what our competitors think, the performance of a potentiostat is not
proportional to the volume or weight of the potentiostat! Gamry's modern electronic design and extensive use of
surface mount technology packs tremendous capability onto a small area.
Don't be fooled by the small size of the Reference 600; there
are over 2400 parts in each Reference 600! You'll
appreciate the small size because it doesn't consume much of
your bench space. And it weighs only 3 kg so it's easy to
move. And it fits inside your glove box.
- Current Interrupt and
Positive Feedback iR Compensation - no need to rig your cells with supporting electrolyte
or geometric modifications anymore, Gamry potentiostats and their controlling software use
control loop algorithms to accurately measure and correct for uncompensated resistance.
- Portability - The
Reference 600 easily interfaces to a laptop computer through the
USB Interface.
- Auxiliary I/O - The
Reference 600 allows you
to control additional equipment via additional I/O interfaces on
the back panel.
External Signal Input
Analog Voltage Monitor
Analog Current Monitor
Auxiliary A/D Input
Signal Generator Output (sum of all DC and AC signals)
Type J Thermocouple Input
Chassis Ground Pin
Miscellaneous I/O Connector: this 15-pin connector
provides a number of inputs and outputs to customize an
electrochemical experiment, including a software-controlled
analog output voltage, two fixed triggers, 4 software-controlled
input triggers, and 4 software-controlled output triggers.
- Multiple Potentiostat Systems
- Up to
eight Reference 600's can be run by one computer.
- Easy Installation - Load
the Gamry software, connect the USB cable, and start your
experiments.
|
|
|
Warranty
|
|
|
The Reference 600™ is
protected by a 2-year factory service
warranty.
|
|
|
Specifications
|
|
|
Click here for
detailed specifications of all Gamry Potentiostats.
|
|
|
Computer
Requirements
|
|
|
- 450
MHz Processor or faster.
- 512
MB RAM
- 80 MB free
hard disk space
- Microsoft® Windows™2000 or XP
|
|
|
System
Information
|
|
|
The Reference 600™
requires electrochemical software for specific electrochemical applications. The
Reference 600™ is shipped with the Gamry
Framework™, Gamry Echem Analyst, a Hardware Operator's Manual, a
Quick-Start Guide, a
Software Installation Manual (CD), a Universal Dummy Cell
3, one
standard cell cable, and a Gamry
Mouse Pad. Special cables, cells and other
accessories are available at
extra cost.
|
|
|
System
Integration
|
|
|
Gamry
Instruments can supply complete systems installed in a desktop or laptop computer.
Custom computer configurations, software, training and installation are available by
special order.
|
|
|
|
|
|
|
