|
The summer has been
HOT, so while
you
have been on vacation, we have been busy
inside where it's cool, working to bring you a new
Application Note, some Tips on Tips (Vycor®,
that is), a new version of the Gamry software (see
Quick Links!), and aNEW family of Potentiostats!
| In this issue... |
 |
 |
|
| Gamry Goes Green - Series G
Potentiostats ! |
 |
|
Gamry's line of PCI card Potentiostats is now
environmentally friendly!
We have re-engineered our Potentiostats to comply
with the Reduction of Hazardous Substances (RoHS)
regulations of the European Union. We took the
opportunity to upgrade the design to take advantage
of the most modern technology, to improve reliability
and performance, and to keep the value-driven price.
|
| The Care of Vycor® Frits |
 |
|
Vycor® is often used at
the end of a reference electrode or a bridge tube to
allow electrical, ionic conductivity between the
bulk of the solution and the internal filling
solution, while preventing large scale convective
mixing of the solutions. Vycor, or "thirsty glass,"
is a porous glass with a fairly low leak rate.
The Vycor frits, however, are not immortal!
|
| Gamry's Electrochemistry ToolkitTM |
 |
Hammer out integrating electrochemistry into your
already complicated, but Nobel Prize-winning,
quantum physics experiment!
Seriously, if you need to tightly integrate a
Potentiostat into your experiment, but were afraid
of the programming task, look at our new
Electrochemistry
ToolkitTM. It brings a
value-priced Gamry Potentiostat into your
programming environment.
|
| FAS1/FAS2 is Retiring! |
 |
We are retiring the FAS2 Femtostat! After a 10-year
lifetime, this ground-breaking instrument is going
to the Great Stockroom in the Sky.
Fear Not! If you need to measure
vanishingly small currents, or astronomically high
impedance coatings, Gamry still has a product to
fill your needs -- the Reference 600! It has nearly
the same current sensitivity (20 aA minimum
resolution) as the FAS2 and the same high
Electrometer Impedance (1 Tohm) as the FAS2.
However, the Reference 600 adds higher current
capability, advanced data acqusition modes, 2- 3- or
4-terminal measurements, 1 MHz EIS measurements, and
USB interconnectivity.
|
| Gamry News: Direct to your desktop! |
 |
If you want to keep current with the newest
happenings at Gamry, and get technical tidbits in
between our newsletters, subscribe to our RSS feed.
What! You never heard of RSS feeds?
|
|
|