| |
ELECTROCHEMICAL IMPEDANCE
SPECTROSCOPY
Theory, Applications, and Laboratory Instruction
A Short Course: April 30 - May 4, 2007 in Jackson, MS
 The
2007 EIS Short Course will be held in Jackson, MS on April 30 through May
4, 2007. The
Faculty for this Short Course comes from the University of Mississippi
Medical Center, Ohio State University, Rockwell Science Center, and
Battery Design Company and the topics range from corrosion to batteries
and fuel cells, and nearly everything in between.
Although the lectures provide a great background in EIS,
the real learning seems to come in the lab sessions. There's plenty of
opportunity for one-on-one contact with the course faculty, as well as
student-to-student sharing.
 Dr.
Rob Sides of Gamry will be there to answer questions about Gamry
instrumentation and electrochemistry in general.
Details and Registration Form are included in this PDF
file of the brochure.
Course Overview
Impedance spectroscopy is an extremely powerful
experimental technique that compares the electrical response of a test
system to a time varying electrical excitation to delineate interfacial
and bulk material parameters. When applied to an electro-chemical system,
impedance spectroscopy can provide information on reaction parameters,
corrosion rates, oxide integrity, surface porosity, coating integrity,
inhibitor function, mass transport, and many other electrode/interface
characteristics. However, effective utilization of this spectroscopy
technique has been hindered by the lack of a comprehensive and cohesive
explanation of the theory, measurement, and analysis techniques.
This course has been designed to fill this void.
Course Objective
The objective of this short course is to provide a
working knowledge of electrochemical impedance spectroscopy. This will
include a discussion of the theory, applications, and measurement methods.
A key objective of this course is to provide hands-on laboratory
experience. The attendee will use EIS to measure corrosion rates and
battery performance, and will learn methods of impedance data analysis,
interpretation, and model fitting both in the classroom and in the
laboratory. The student will become familiar with major brands of
commercially available impedance systems as well as with software for
experiment control, data analysis, and model fitting. Since it is intended
for all participants to use the equipment in the laboratory sessions, the
class size will be limited to 30 students.
The course is designed for scientists and engineers from
industry, government, and academia who have had no prior experience with
EIS. However, since the range of information presented is from an
introductory to advanced level, this course will also be of interest to
those who already have experience with EIS and wish to discuss more
advanced topics. An understanding of basic chemistry and physics is
requisite, and an understanding of basic electrochemistry will be
beneficial.
Course Schedule
-
Monday: Basic Concepts/Incentives, Transfer
Function Theory, Impedance Modeling, Equivalent Circuit Approach
Methods of Presentation and Analysis
-
Tuesday: Distributed Elements (mass transport,
porous electrodes, etc.), Impedance Modeling via Continuum Reaction,
CNLS Fitting
-
Wednesday: Kramers-Kronig Transforms,
Applications: corrosion rates of bare metals, low conductivity
environments, passive film behavior
-
Thursday: Applications: coatings, inhibitors,
reaction parameters, batteries and fuel cells
-
Friday: Special
Topics-- limitations of the method, equipment
considerations. (course ends at 12:00 noon)
Course Lecturers
-
Rudy Buchheit -Professor, The Ohio State University,
Columbus, OH
-
John Harper - Solartron Analytical, Farnborough, UK
-
Martin W. Kendig - Senior Scientist, Rockwell Science
Center, Thousand Oaks, CA
-
Rob Sides - Gamry Instruments, Warminster, PA
-
Robert Spotnitz - Battery Design Company, Pleasanton,
CA
-
Ray Taylor - Professor, University of Mississippi
Medical Center, Jackson, MS
Details and Registration Form are included in this PDF
file of the brochure.
|
